
No comments yet. Yours would be the first.
Find mods for your exact car, follow projects in progress, and post what you did so the next owner isn't guessing. From a first lift kit to a full EV conversion.
Someone with the same car is about to search for exactly that.
Loosen a filter, or park something here yourself.
No owner photos yet — add yours and it leads the wall.
3.6L V6
Ranked by how many owners have actually done them, not by what was posted most recently.
Ordered by how many owners it hits. Adding yourself takes one tap and sharpens the mileage curve for everyone.
| Issue | Affected | Onset | Median fix | Status | |
|---|---|---|---|---|---|
No known issues reported yet. If something goes wrong, report it. | |||||
Every one in the community. Sort by miles to find the ones that survived, by mods to find the ones that changed.
Generation-level data. Where a figure varies by year or engine, the range is shown.
| Generation code | E2XX |
| Production | 2017–2019 |
| Body | Sedan |
| Curb weight | 3,840 lb |
| Length | 197.5 in |
| Figures for | Avenir 3.6L V6 AWD |
| Width | 73.5 in |
| Fuel capacity | 15.9 gal |
| Height | 57.5 in |
| Cargo | 112.3 gal |
| Wheelbase | 114.4 in |
| Fuel economy | 23 mpg combined (Avenir 3.6L V6 AWD) |
| Engine | Layout | Displacement | Fuel | Power | Torque | Redline |
|---|---|---|---|---|---|---|
| 3.6L V6LGX | V6 | 3,564 cc | Gas | 310 hp | — | — |
Mods where the owner turned on step-by-step instructions. Everything here has torque specs, tools, and a cook mode.
Symptom wording matters more than the diagnosis — most people arrive knowing the noise, not the part.
Modifications documented start to finish — a simple job or a full build.

No comments yet. Yours would be the first.

No comments yet. Yours would be the first.

No comments yet. Yours would be the first.

No comments yet. Yours would be the first.

No comments yet. Yours would be the first.

No comments yet. Yours would be the first.
White Inno 660 roof box with some cheap amazon roof racks, does the trick!

No comments yet. Yours would be the first.
Installed swivel seats and then built custom adapters to bolt up D4 Audi A8 seats, they are big for the vehicle but insanely comfortable.

No comments yet. Yours would be the first.
Installed a set of D4 Audi A8 Sport seats (Diamond stitched) in brown, color is a little off but they are awesome seats.

No comments yet. Yours would be the first.
Previous owner installed an upgraded carrier bearing, not sure the brand

No comments yet. Yours would be the first.
Rust and damage repair

No comments yet. Yours would be the first.


OBX stainless shorty header. Magnaflow, high flow cat, custom stainless catback pipe, magnaflow muffler with green exhaust tip

No comments yet. Yours would be the first.
1 of 45 SRI made by USRT. Had to adapt the AVH injectors to fit. Intake manifold spacer and BBM billet fuel rail with 4 bar fpr to add to the beautiful look. NESI valve cover wrinkle black powder coated

No comments yet. Yours would be the first.
Since my truck has a rear window defroster, the wiring is already present to add heated mirrors. Just needed to purchase some XLT heated mirrors and install.

No comments yet. Yours would be the first.
Purchased SPD Performance high flow downpipes and swapped them over from the stock ones, in addition to a full SPD Performance Whistle kit.

No comments yet. Yours would be the first.
Fixed sagging headliner courtesy of 20 year old glue. Dropping the headliner wasn't incredibly difficult except for around the sunroof retaining trim. Using the right glue is critical for this, I used 3M Super 77.

No comments yet. Yours would be the first.
Removed EGR pipes from exhaust manifolds, replaced with Darkside Developments race pipes. Ended up breaking a bolt in the passenger side manifold, welded a plug in it's place rather than using a block off plate on that side.

No comments yet. Yours would be the first.

No comments yet. Yours would be the first.
Coolant ball delete, evap delete, sai delete, washer fluid res delete, swoops hidden maf pipe, nuespeed pflow intake, ac delete, aux coolant pump delete

No comments yet. Yours would be the first.
Rieger body kit paint matched to the car

No comments yet. Yours would be the first.

No comments yet. Yours would be the first.

No comments yet. Yours would be the first.
ABS Module fault recorded in VCDS, and associated modules noting that the ABS Module could not be communicated with. Cross referenced the wiring diagrams for the footwell splices and checked continuity + CAN signal. Ended up tracing CAN Signal and ground all the way to the ABS Module, discovered module faulty. Brake fluid was also present in the connector. Removal and replacement involves pulling the wiper cowl, removing one ECU (the master), and the cabin air intake, in addition to a full brake bleed. Make sure you follow the VCDS output tests to properly bleed the front brakes, and re-code your new ABS module accordingly for proper communication.
No comments yet. Yours would be the first.

No comments yet. Yours would be the first.

No comments yet. Yours would be the first.
You’re caught up.
Everything from people and groups you follow, plus anything that fits a car you own.
Accept the people who want to connect, and see who you’re friends with.
Everything you have started and not finished yet.
No mod drafts. Anything you save from the mod composer lands here.
No vehicle drafts. A car you start adding and do not finish waits here.
No event drafts. An event you start and do not create waits here.
Saved in this browser only — they will not follow you to another one.
Loading…
Clubs, model-specific crews and regional scenes. Join one, or start your own and bring the discussion together.
Loading…
Everyone on Auto Maker Space, seated side by side wherever they connect — members, their vehicles, the mods fitted to them, the events that bring them together and the shops and vendors that keep them running.
Click any tile to see its details and what it connects to.
Everything here is yours. Export it or delete it whenever you like.
Post/
Pick one. You can change your mind before publishing.
Document your mods and export your data any time — free to use for public projects.
Already have an account? Sign in
Keep control of your work — you can export or delete everything at any time. Free to use for public posts.
It may have sold, been taken down, or never been public. The marketplace has the rest.
Browse partsTakes about twenty seconds, and we’ll drop you straight back where you were.
Already have an account? Sign in
Keep control of your work — you can export or delete everything at any time. Free to use for public posts.
Space or click the dial to rev
There’s no page at this address. It may have been moved, unpublished, or scrapped before it ever ran.
A Monster Parts Lab company
We build tools for people who take vehicles apart and put them back together better. Auto Maker Space is our platform for documenting that work — free to use, with nothing to set up and everything yours to export.
Free to use
The home for documenting vehicle work — every make, model and year. Free to use, with nothing to set up and everything you post yours to export.